Stage 1kits comes with stainless steel mandrel bent crossover and 1pc. down pipe. A 70mm turbo and blow off valve are standard. Kit is designed to bolt right in on a 99-12 GM 2 and 4 wheel drive truck. Rated at 7psi max.

• 70 mm turbo
• 39 mm gate (vented to atmosphere gate)
• 50mm blow-off valve
• Mandrel bent Stainless steel crossover and down pipe. Down pipe is a 1 piece design.
• Swept runner thick wall turbo manifold
• Air filter
• Cold pipe with bead rolled ends.
• Silicone couplers and clamps
• Oil pressure and return lines
• Oil pressure and return fittings
• 02 bungs
• washers, bolts and nuts

Fuel injectors, tuning, and final exhaust connection must be purchased elsewhere..

. If you want to get into a forced induction system and your on a tight budget the Stage 1 kit is for you. This kit gets you on your way to being boosted in the shortest amount of time. Intercooler is not supplied to keep the costs down and install time to a minimum. The intercooler can be purchased later for higher hp.
The Stage 1 is built to deliver more horsepower then any other kit at this price range. If you have a weekend and common hand tools you can install this kit and start having boosted fun right away.

Kits comes with a 70mm turbo, standard. This turbo is good for 550HP to the ground. Thick wall swept runner turbo manifold, uses 3/8" flanges that are TIG welded. Flanges are machined so the runner inserts into the flange, not just stuck on the side. This gives you a stronger weld, the best looking weld and great heat control during the welding process. 39mm waste gate keeps the boost under controll. Standard waste gate configuration is vented to the atmosphere. This allows you to hear when the gate is open. The cold pipe has bead rolled ends. A 50mm blow off, keeps away the turbo surge, and it just sounds cool. Releasing all the boosted air from turbo to throttle when you lift off the throttle. The blowoff protects the turbos for turbo surge and protects the throttle body from having boost pushing on a closed throttle blade. HI boost pressure with-out a blowoff valve can result in damage to your turbo and throttle body blade or shaft. Without an intercooler max boost should be kept to 7psi and down. This is an entry level kit.
Kit is designed for 99-2011 GM trucks.

Final kit will look different then in pic.

TURBO KITS ARE FOR OFF ROAD USE ONLY!!! Customer is responsible for the final exhaust connection and all exhaust work after the downpipe..