INTRO - Kit $ 4254.00

• Turbonetics 62-1 turbocharger, with a 0.81 A/R turbine housing for fast spool.
• 38mm waste gate
• Blowoff valve
• Stainless steel flanges, 3/8” thick.
• Stainless steel turbo manifold with 1.625” diameter primary tubes.
• 2.5” diameter crossover pipe with flex coupler, prevents stress cracking
• 3.0” diameter downpipe
• Stainless steel flex joint connection for the wastegate, prevents stress cracking
• K&N cone-style air filter, 4” diameter by 5” long
• 10 ft of .625” heater hose and clamps
• Heat shielding for low side air conditioning line
• 1 tube of Copper Seal high temperature silicone sealant
• 3.0” diameter stainless steel charge piping
• Silicone 90 degree coupler for turbocharger connection to charge pipe connection
• Silicone 90 degree coupler for charge pipe to throttle body connection
• Silicone coupler for MAF to charge pipe connection
• 6 stainless steel T-bolt clamps for silicone couplers
• All mounting hardware, nuts & bolts
• Oil feed line (-3 AN)
** Upgrade to a T-76 .96 a/r add 400.00
*** Air/Air intercooler kit. Installs behind front bumper. 700.00
**** Upgrade to a Air/Water Intercooler add 1500.00

The Front Mount INTRO- turbo system is designed with the customer in mind. This turbo kit fits late model Chevy and GMC trucks. We used all stainless steel construction through out. NO rusting or need for coatings*. Easy to install with simple hand tools. Install time is anywhere from 6-10 hours depending on skill and tools available.
The INTRO-turbo kit is a great starter kit with room to grow and upgrade at a later time.
System does not come with an intercooler kit and is only rated up to a maximum 500hp. You will need to take your vehicle and have it re-tuned for the turbo system. The down pipe is routed under the vehicle and final connection will need to be made. This is the most complete turbo kit on the market for off road late model Chevy and GM trucks or SUV's.

Upgrade options are
*Coated hot pipes add a higher level of looks over the stardard stainless pipes.
*Larger turbo, if you need to make more power.
*Air to water intercooler, to keep things cool under pressure. Kit includes all necessary
parts to install, pump, hoses, fittings and mounting hardware.
*Larger pressure blow-offs. Special order only. See details
*Larger waste gate. Special order only. See details
Details: Special order item means a kit will need to be modified to accept these items; or a complete new system will have to be built. This kit will be modified or built for you and your requirements may not match anyone elses, so a small deposit is required. Time line depends on modifications that is being required.

INTRO: THIS KIT IS FOR OFF ROAD USE ONLY!!! Customer is responsible for the final exhaust connection and all exhaust work after the downpipe..

Passengerside Manifold. Log design with extra long runners. T4 turbo flange, and GM oring Gasket seal at the crossover flange.

All joints that can be are double welded. This adds strength to the joint and makes sure there are no leaks.